greenfeathers NCIP2, Быстрый старт

Страница: 4 / 16

4
Assemble the weatherproof adaptor
M
Line up the longer network cable with the large connector on the trailing cable
M
Thread the parts over the end of the cable in the order shown on the diagram (right)
M
Connect the network cable jack into the port
M
Push and twist the pieces into place from left to right
Connect your camera to power
M
Connect the other end of the network cable to the port labelled PoE on the power
block as shown in the diagram (right)
Connect to your router
M
Connect the short network cable into the LAN port on the power block
M
Connect the other end into one of the available ports on your network router
M
You can now connect the mains power supply and switch on the power at the wall
1. Camera Setup
Before installing the camera in your nest box, wire it up inside the house first to make sure
everything is working as it should.