![background image](http://html1.mh-extra.com/html/greencut/srj200c/srj200c_instruction-manual_2261532054.webp)
54
IDENTIFYING AND SOLVING PROBLEMS
The table includes some of the most common problems, their causes and remedies.
PROBLEM
CAUSE
SOLUTION
The saw blade breaks.
A. Too much tension on the
blade.
A. Reduce the blade tension.
The saw blade comes
out of the rollers.
A. The blade and rollers are not
properly aligned.
A. Adjust the alignment of the blade
and roller.
The saw blade
oscillates, it cannot cut
straight.
A. Insufficient blade tension.
B. Blade guide set too high.
C. Blade guides or back pressure
bearings are not correctly
adjusted.
A. Increase the blade tension.
B. Ensure that the height of the blade
guide is set just above the height of
the workpiece.
C. Adjust the knife guides and back
pressure bearings.
Acoustic signal when
the machine is running
or cutting.
A. Insufficient blade tension.
B. The blade guides or back pressure
bearings are not correctly
adjusted.
A. Increase the blade tension.
B. Adjust the knife guides and back
pressure bearings.
La lama si ferma
durante l'uso o si
allenta dopo lo
spegnimento della
macchina.
A. The blade stops during use or
loosens after the machine is
switched off.
A. Increase the blade tension.
The engine does not
start.
A. No power supply.
B. Thermal overload
activated.
C. Electrical or motor fault.
A. Ensure that the machine is connected
to a 240 VAC power supply.
B. Switch off the machine and allow
the motor to cool down before using
it again.
C. Have the machine inspected and
repaired by an authorised service
centre.
The motor stops
during use.
A. The motor stops during
use.
A. Switch off the machine and allow
the motor to cool down before using
it again. Check that the saw blade is
correctly installed and adjusted and
that it is sharp.
Overheating of the
saw blade or burning
of the workpiece.
A. Saw blade is dull.
B. Incorrect blade type.
C. Incorrect workpiece
material.
A. Replace the saw blade.
B. Use the correct type of blade for the
material.
C. Do not try to cut.
Содержание SRJ200C
Страница 2: ......
Страница 72: ......
Страница 73: ......
Страница 74: ...www greencut es Manual revisado en Septiembre de 2021...