Greencut GLM690X, Инструкция по эксплуатации

Страница: 80 / 112

80
MAINTENANCE
• The engine must be turned off and cold enough to touch before performing any maintenance work.
• To keep the equipment performing at optimal efficiency, regular checks and maintenance is required. This will
ensure best performance of your machine and will extend the life of your product considerably.
• The maintenance program indicated below specifies certain preventive maintenance checks, necessary tasks and
how often they should be performed.
• Some maintenance indicated in this manual may be beyond the capacity of some users. Contact the Official
Technical Service for those procedures for which you do not feel comfortable doing or for which you do not have
the necessary tools or experience.
NOTE: Harsh operating environments such as extreme temperatures, dust, etc. may require
more frequent maintenance. Maintenance frequencies are based on general factors including a
maximum use of approximately 300 hours per year. Apply common-sense when following the
maintenance schedule based on your actual use of the product. Keep reasonable records of
maintenance activities for reference. Failure to follow the maintenance schedule, using incorrect or
non-compatible accessories or replacement parts, or general negligence may result in making the
product warranty void.
PERIODIC MAINTENANCE
MAINTENANCE EVERY USE
FIRST MONTH
OR 20H. USE
EVERY 3
MONTHS OR
50H. USE
EVERY 6
MONTHS OR
100H. USE
EVERY YEAR OR
300H. USE
Engine Oil Check Replace Replace
Oil Leaks
Check/repair as
necessary
Air Cleaner Check Clean and replace as necessary
Spark Plug Check Replace
Valve Clearance
Adjust as
necessary
Combustion Chamber
De-choke as
necessary
Idle Speed
Check/adjust as
necessary
Fasteners
Check/tighten
as necessary
Fuel Tank Flush and clean
Fuel Line Replace as necessary
Fuel Filter
Clean and replace as necessary
Fuel Strainer Check