Green GP600B-HP EVO, Руководство пользователя, Страница: 27 / 32

Protections description
• UVP (Undervoltage protection)
If the voltages fall below a certain tolerance value on the single lines, the PSU automatically
switches off.
• OVP (Overvoltage protection)
If the voltages increase above a certain tolerance value on the single lines, the PSU
automatically switches off.
• SCP (Short-circuit protection)
In the case of a short-circuit this feature prevents damage to the core components of the
PSU and its system components.
• OPP (Overload protection)
If the system is oversized and requires more power from the PSU than it can perform, this
protection function is activated.
• OCP (Overcurrent protection)
If the load on a single line is higher than indicated, the PSU automatically switches off.
• OTP (Over Temperature Protection)
If the temperature is too high, the PSU automatically switches off.
• NLO (No-Load Operation)
No-load operation is a required protection that allows the power supply to turn on and work
correctly even if there is no load on its outputs
.
NOTE: In case that one of your PSU protection activate, Power unit would automatically
shutdown. For releasing protection first try to understand the reason of problem and then
put the backside rocker switch to off mode or detach input cable and back to On mode or
attach input cable.
4