operating manual
Fill level indicator - digital
www.greenlife.de
If there’s no key operation in depth setting mode for longer than 15s the unit will switch to
normal display mode automatically. (There will be measurement errors if the tank depth and air
gap are not set correctly).
If you miss this step, tank depth and air gap can be set later. In normal operation mode, press
and hold
SET
and
ALARM
keys for 5 seconds to set Tank Depth and Air Gap values. The
setting steps are the same as above described.
4.2 set time
In normal display mode press
SET
key for 3 seconds to enter
SET
mode.
•
12/24H:
12 Hr or 24 Hr will flash. Press
+/MAX/MIN
or
-/TANK
key to select 12 H or 24 H.
Press
SET
key to move to hour setting.
•
HOUR:
Hour value will flash. Press
+/MAX/MIN
or
-/TANK
key to increase or decrease hour
value. When hour value is set press
SET
key to set minute value.
•
MINUTE
: Minute value will flash. Press
+/MAX/MIN
or
-/TANK
key to increase or decrease
minute value. When minute value is set press
SET
key to set temperature unit.
4.3 set temperature unit
•
Temperature unit will flash. Press
+/MAX/MIN
or
-/TANK
key to select temperature unit of
ºC
or
ºF
. After temperature unit is set press
SET
key to set tank level unit.
4.4 set tank level unit
•
Tank level unit will flash. Press
+/MAX/MIN
or
-/TANK
key to select water level unit of miter or
feet. After tank level unit is set press SET key to exit.
Technical support via:
phone: +49 (0) 385 7733 775
E-Mail: [email protected]
Status at: 02/18
Subject to technical changes.
The manufacturer is not responsible for printing errors.
page 26