Sleep mode:
Press the [SLEEP] button after the start or in the other mode, it will go into
the sleep mode. In this mode the sleep indicator will light and the unit will
run in speed 1.
Manual mode:
Press the [Air Flow Speed Select] button after the start or in any other mode,
it will operate in manual mode. In this mode, the corresponding speed
indicator will light and the unit will run at the selected speed. You can
change the speed by pressing the [Air Flow Speed Select ] button.
Z Mode Button (Activated Oxygen)
Press the [Z Mode] button after the start or in any mode, it will go into the Z
Mode. Z Mode will operate for 60 minutes, after which there will be a 15
minute standby period. After the standby period, the Z Mode can be
restarted by pressing [Z Mode] button as needed.
Timer function:
Press the [TIMER] button after the start or in the other mode, it will go into
the timer mode. In this mode you can set the specific time between
0.5-24hrs to automatically switch off the unit. The set time will be indicated
on the display.
Stop function:
If you want to switch off the unit completely press the [Power] button, the
unit will switch off and all lights will go off.
Filter reset button function:
Press this button when starting up, the button lamp light, and the display
will show the residual life of filter "%". 3 seconds later, it will turn back on.
When the filter needs to be changed, the screen will flash “05”. After
replacing filter, hold this button for 5 seconds to reset.
1-888-601-5886
6
Excellent
Blue
Good
Green
Average
Yellow
Poor
Red
AIR QUALITY INDICATOR
HOW TO USE
