GREEN INSTRUMENTS G3600, Руководство пользователя

Страница: 9 / 28

G
3600
/G
3601
Inert Gas Sampling Boards
Ver.2.3 – Revision April 2022
9
The successful and safe operation of this equipment is dependent upon proper handling,
installation, operation, and maintenance.
Recycling
Do not dispose any part of the sampling system with regular waste. Disposal should be in
accordance with the requirements of the current statutory regulations.
3.4 Single Board
3.4.1 Mounting Panel
The mounting panel has two angle iron mounting brackets. The brackets are made of or-
dinary mild steel and can be welded or bolted directly to a chosen structure as required.
The two mounting brackets are mounted horizontal and parallel with a distance of 550
mm. For dimensions and layout see Figure 3-2 and Figure 3-3.
3.4.2 Sample Gas Connection
The sample gas must be extracted from a suitable location that represents the gas to be
tested.
The connection for sample gas is located in the top left corner of the system board at the
sample manifold. It is possible to connect up to three samples to the manifold. The three
connections are all arranged as 1/8" BSP female connections, and marked from bottom:
1, 2, and 3. The system is supplied with the manifold sample ports plugged.