11
www.bikefriday.com
800-777-0258 • +1-541-687-0487
Open the box or TravelCase and remove the bike from the
container. Remove the bubble wrap or felt covers and lay
the disassembled bike out on front of you.
Connect Front and Rear Frame Sections
With a hand holding the front and rear sections respec-
tively, insert the front (male) section into the rear
(female) section of the main frame. Ensure that the snap
/ spring button slips into one of the 4 holes.
Install the Rear Wheel
Release (spread open) the rear brake and make sure you
are in the highest gear (largest #) on the right side (rear)
shifter. [SEE PAGE 12 FOR BRAKE RELEASE OPERATION] To
install the rear wheel, grasp the derailleur body and pivot
it backward to make it easier to insert the wheel into the
dropouts. When putting the rear wheel into the dropout,
align the chain with the smallest cog of the cassette.
Fasten the rear quick release skewer (or rear axle bolts on
a Dual Drive hub).
Assembling your pakiT
Fig. 2 Grasp Derailleur body.
Fig. 3 Fasten quick release.
Remove Fork/Frame Spreaders
The PVC tubing in between your
fork legs and rear dropouts are
intended to help prevent damage
when traveling. They are held in
place with wheel quick release
skewers. Open the quick release,
unthread the knurled nut, and
put the spreaders in the tool
pouch for future use.
Fig. 1 Fork speader.
