SHORT RODS
(2
20
m
m
)
Radius
Shorter rods will flex to the same bend
radius as above but greater care
must be taken because of the
increased stiffness caused by metal
end fittings.
WARNING -
DAMAGE CAN BE CAUSED BY OVER
BENDING RODS
When drilling a hole through to a
restricted cavity, angle the hole in the
direction you want the rods to go. It
will reduce the bending load and
minimise the chance of the rod end
catching.
Always rotate connected rods
clockwise to avoid them unscrewing
in use.
Use the most appropriate cable
handling accessory.
A flexi lead should be employed to
help ease rods round corners.
The way in which you use your rods is
limited only by your imagination!
TIPS AND TRICKS
Issu
e n
o:
70
53
05
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
www.greenbrook.co.uk
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
GUARANTEE
Your Norslo Draw Rod Kit
is guaranteed for 1 year from
the date of purchase.
This is in addition to your statutory rights.
DR10 GR10 Ins May 18.qxp_DR10 Instructions 21/05/2018 15:38 Page 2
