LiFePO4 Battery System for Households
LiFePO4 Battery System for Households
5. EMERGENCY SITUATIONS
GREEN BANK cannot guarantee battery absolute safety.
5.1 Fire
In case of fires, make sure that the following equipment is available near the system.
• SCBA (self-contained breathing apparatus) and protective gear in compliance with the Directive on Personal
Protective Equipment 89/686/EEC.
• NOVEC 1230, FM-200, or dioxide extinguisher
Batteries may explode when heated above 150°C. KEEP FAR AWAY from the battery if it catches fire.
If the battery pack leaks electrolyte,avoid contact with the leaking liquid or gas.If one is exposed the leaked
substance,immediately perform the actions described below.
• Inhalation: Evacuate the contaminated area, and seek medical attention.
• Contact with eyes: Rinse eyes with running water for 5 minutes, and seek medical attention.
• Contact with skin: Wash the affected area thoroughly with soap and water, and seek medical attention.
• Ingestion: Induce vomiting, and seek medical attention.
If the battery pack is wet or submerged in water, do not let people access it, and contact your supplier for help.
Damaged Batteries
Damaged batteries are not fit for use and are dangerous and must be handled with the utmost care. It may
leak electrolyte or produce flammable gas. If the battery pack seems to be damaged, pack it in its original
container, and then return it to your supplier.
Products that are operated strictly in accordance with the user manual are covered by the warranty. Any
violation of this manual may void the warranty.
Limitation of Liability
Any product damage or property loss caused by the following conditions, GREEN BANK does not assume any
direct or indirect liability.
• Product modified, design changed or parts replaced.
• Changed, or attempted repairs and erasing of series number or seals;
• System design and installation are not in compliance with standards and regulations;
• The product has been improperly stored in end user’s premises;
• Transport damage (including painting scratch caused by movement inside packaging during shipping). A
claim should be made directly to shipping or insurance company.
5.2 Leaking Batteries
5.3 Wet Batteries
5.4 Warranty
4.3 ON / OFF or SOC Led (Mode or SOC)
LED Indicator
Messages
On/Off
Red
On
Green
Flashing
Working in discharge mode
When the following faults occur:
1.Battery voltage is too low;
2.Cell voltage is too low;
3.Cell temperature is too high;
4.Cell temperature is too low;
5.BMS temperature is too high;
The SOC of the battery is shown by the LED.
4.2 Description for LED
Note: The battery need to be fully charged for at least once in one month to ensure the accurate SOC
calculation.
100%
75%
50%
25%
08
09
Once the batteries are connected well, simply press On/Off button to enable the output of the battery pack.
4. OPERATION
24V Front view
48V Front view
1.Switch on: When the On/Off button pops up, the battery will turn on and there will be current output.
The LED will show the SOC.
2.Switch off: Press the On/Off button (recessed state), the battery will shut down and no output current.
4.1 Switch On / Off
L
O
M
W
E
T
V
S
O
Y
L
S
T
A
E
G
G
E
A
E
T
N
TO
ER
S
GY
