2.4 Installing the unit
(Continued)
PAGE 7
Installation
GUIDE
Step 2:(Continued)
Cut the four metal tabs to release the
mounting flairs for the inlet and outlet ports.
figure 2.2j-
Bend tabs outward approximately
90 degrees.
figure 2.2h -
Apply plenum seal tape all
around both openings on the back of the unit.
figure 2.2i
Step 2:(Continued)
figure 2.2d
figure 2.2e
figure 2.2f
figure 2.2g
Tips
to installer
Please consult local authorities to find out
whether the installation of electrical
products requires the services of a certified
technician or electrician.
Greentek
TM
TIPS
to installer
Removing the filters from the unit will
facilitate your job.
Ducting Flairs
mounting system
The Whole-House Greentek
TM
HEPA
Plenum Systems are designed for single
person
installation. Greentek
TM
is introducing it’s
«Ducting Flairs» which is integrated
within the unit and will enable you to
save time and effort.
Once the holes are made in the main
return duct and the unit is aligned, the
installer just has to unfold the «Ducting
Flairs» and screw the unit in place.
