55
Installation and Maintenance
Service Manual
Remove the tapping screws fixing the motor support.
Raise the motor support to remove it.
Remove the 2 bolts fixing the valve subassemblies.
Unsolder the welding joint connecting the gas valve
and the return air pipe. Remove the gas valve.
(Note: When unsoldering the soldering joint, wrap the
gas valve with wet cloth completely to avoid damage
to the valve caused by high temperature.)
Unsolder the welding joint connecting the liquid valve
and the connecting pipe.Remove the liquid valve.
Remove the 3 nuts fixing the compressor. Remove
the compressor.
12.Remove the valve subassembly
11.Remove the motor support
13.Remove the compressor
motor support
valve subassembly
compressor
