Gree XE72-44/E Скачать руководство пользователя страница 2

Страница: 2 / 29

User Notice

◆

Never operate the wired remote controller and the wireless remote controller with wet hands.

◆

Please read the manual carefully before using and installing this product.

◆

Never install the wired remote controller in the moist circumstance or expose it directly under

the sunlight.

Do not remove or install the wired controller by yourself. If there is any question, please

contact our after-sales service center.

The wired controller is a general model, applicable for several kinds of units.Some functions

of the wired controller are not available for certain kinds of units, more details please refer to

the owner’s manual of unit. The setting of such unavailable function will not affect unit’s

operation.

The wired controller is universal. The remote receiver is either in the indoor unit or in the wired

controller. Please refer to the specific models.

◆

As for some indoor units connected with the wired controller, if use the remote controller

whose set temperature is adjustable under auto mode, the wired controller will receive the

mode signal of remote controller, rather than its set temperature under the auto mode.

◆

The wired controller is the universal component. When indoor unit has connected with the

wired controller, display status of indoor unit is decided by the indoor unit. Valid status and

invalid status are all belong to normal status.

Never beat, throw, and frequently disassemble the wired remote controller and the wireless

remote controller.

Содержание XE72-44/E






























Результаты поиска

Содержание XE72-44/E

Отзывы:

Похожие инструкции для XE72-44/E

Бренды по названию

Популярные бренды

Gree XE72-44/E, Руководство пользователя

Результаты поиска

Содержание XE72-44/E

Отзывы:

Похожие инструкции для XE72-44/E

Бренды по названию

Популярные бренды