background image

2

WARNING

When having a burning smell 

or smoke, please turn off the power 
supply and contact with the service

may be damaged, and may cause 

center .

If the abnormity still exists, the unit 

electric shock or fire.

 

Power must adopts the special 

circuit to prevent fire.

Otherwise, it can cause electric
shock or fire.

Otherwise, the accumulated dusts

may cause overheating or fire.

Never damage the electric wire or  

use the electric wire which is not

appointed.

Otherwise, it will cause overheating or  

fire. 

Cut off power supply

 

THE INSTRUCTIONS BEFORE USE

GENERA L INFORMATION

Don't attempt to repair the air 

conditioner by yourself.

Please note whether the installed

stand is firm enough or not.

Don't step on the top of the outdoor 

unit or place something on it.

As falling off the outdoor unit can be 

dangerous.

If it is damaged, it may lead to the

fall of the unit and cause the injury.

The wrong repair will lead to an electric

shock or fire, so you should contact the

service center to repair.

Earthing: The unit must be reliably

earthed. The earthing cable shall

be connected to the special earthing

device in the construction.

Never cut off or damage power

cables and control wires. If the 

power cable and signal control wire 

were damaged, change them by 

professional.

When cleaning, it is necessary

to stop driving and turn off the

power supply.

Otherwise, it may cause electric

shock or damage.

Disconnect the power supply if

long putting the air conditioner out 

of use.

       The power supply must adopt

the special circuit that with air switch

protection and assure it has enough

capacity. The unit will be turned on or

off according to your requirement

automatically, please do not turn on

or turn off the unit frequently, otherwise

disadvantage effect may be caused

to the unit.

Rated voltage of this air conditioner

208-230V,60Hz, The compressor

will vibrate sharply if the voltage is

too low, resulting in damage to

refrigerating system. Electrical

component are easy to damage if

the voltage is too high.

Содержание WHD(18)ND3CO












Отзывы: