OPERATION OF WIRELESS REMOTE CONTROLLER
MODE BUTTON
Use the “
MODE
” button to select one of the available modes.
The selected mode will be displayed on the remote controller
and the appropriate icon will be displayed.
AUTO
– Unit will automatically select heating or cooling to
maintain room temperature between 68°F and 77°F.
The remote controller will display the Auto Mode icon with
no setpoint. The front panel display will show "77."
COOL
– To cool to selected setpoint and remove moisture.
System varies compressor speed to maintain desired temperature.
HEAT
– To heat to selected room setpoint. System varies compressor speed to maintain
desired room temperature.
FAN ONLY
– To circulate air without heating or cooling. Use Fan Speed button to select
speed from low to high.
DRY
– Select
DRY MODE
to increase moisture removal
during warm humid conditions. In Dry mode the indoor fan
will run at low speed during the cooling cycle. When setpoint
is reached, the indoor fan will turn off with the compressor.
: AUTO
: COOL
: DRY
: FAN ONLY
: HEAT
Icons Displayed
FAN BUTTON
By pressing this button, AUTO, LOW ( ), MEDIUM ( ), or
HIGH ( ), speeds can be circularly selected. AUTO is the
default fan speed after Power ON.
NOTE:
In DRY mode, fan speed is not adjustable, it will remain at LOW.
Fan Button
LIGHT BUTTON
Press the LIGHT button to turn On or Off the display on the ceiling
cassette. When the indoor unit first powers on, the ceiling cassette
display will default to ON. The LIGHT icon will display when the
front panel display is ON.
Light Display
AUTO
11
