22
POWER FAILURE MODES
The unit has two selectable system power up modes:
Power Failure Recovery
After the initial power up, the unit will store user selections and system parameters in
non-volatile memory. These parameters are retained during a power failure. When power is
returned, the system will automatically return to the last operating mode.
Power Failure Standby
The system will power up in standby or off mode. This is the factory default setting.
POWER FAILURE MODE SETTINGS
To set Power Failure Recovery Mode, turn the unit OFF and press the Mode and
▲
buttons
simultaneously for 5 seconds until the MEMORY Icon is displayed.
Repeat the process to select Standby mode. In Standby mode the Memory icon is not displayed.
OPERATING INSTRUCTIONS
F
F
F
MEMORY
Turn Unit Off.
Press Mode and
▲
buttons 5 sec
until MEMORY icon is displayed.
Repeat to change Modes.