Drainage way
■ In cooling or drying operation, the condensation water will be drained to the
chassis and spattered by water-striking motor. As the temperature of condenser
is high, most of the condensation water will be evaporated and drained to
outdoor. So usually, only a little condensation water will be accumulated inside
the chassis and you do not need to discharge the water frequently.
■ When the chassis is full with water, the buzzer will give out 8 sounds and "H8" is
displayed to remind user to discharge water:
● Move the unit to a suitable place for discharging water; do not tilt the unit and
keep it horizontal during moving.
●
Pull out the rubber plug at the rear lower part of unit and then the condensation
water can be discharged (as shown in following fig).
● When the water is discharged completely, put back the rubber plug.
● After full water protection is eliminated and the compressor has been stopped
for 3 minutes, the unit will resume operation.
11
