21
Technical Information
Service Manual
2. +/- button
● Press "+" or " - " button once increase or decrease set temperature 0.5 °C. Holding "+" or " - " button, 2s later, set temperature on remote
controller will change quickly.On releasing button after setting is finished, temperature indicator on indoor unit will change accordingly.
(Temperature cant be adjusted under auto mode)
● When setting TIMER , press "+" or " - " button to adjust time.
3. Cool button
Press this button, unit will operate in cool mode.
4. Heat button
Press this button, unit will operate in heat mode.
5. FAN button
Pressing this button can set fan speed circularly as: low( ), low medium( ),medium( ), medium high( ),high( ),
super( ),auto(AUTO),quiet( ).
Note:
● Turbo function is not available under dry and auto mode.
● Automatically operate slient speed when starting sleep fuction.
● The unit operates at low speed under dry and auto dry mode. The speed cant be adjusted.
● Under AUTO speed, air conditioner will select proper fan speed automatically according to ambient temperature.
6. I FEEL button
Press this button to start I FEEL function and " " will be displayed on the remote controller. After this function is set, the remote controller
will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor temperature according to the
detected temperature. Press this button again to close I FEEL function and " " will disappear.
● Please put the remote controller near user when this function is set. Do not put the remote controller near the object of high temperature or
low temperature in order to avoid detecting inaccurate ambient temperature.
When I FEEL function is turned on, the remote controller should be put within the area where indoor unit can receive the signal sent by the
remote controller.
Auto
Introduction
for Icons on Display Screen
battery power
Send signal
8
ć
heating function
I feel function
Set fan speed
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
humidity functions
Temp.display type
Healthy mode
Set temperature
INTELLIGENT
HOUR ON OFF
WIFI
Up & down swing
Left & right swing
child lock
Replacing air
Quiet mode
Auto quiet mode
X-FAN function
Turbo fan speed
Sleep mode
Set time
Introduction for Buttons on Remote Controller
Note:
●This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the model
dont have, if press the corresponding button on the remote controller that the unit will keep the original running status.
● After putting through the power, the air conditioner will give out a sound. Operation indicator " " is ON (red indicator the colour is
different for different models). After that, you can operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller, the signal icon " " on the display of remote controller will blink once
and the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.
1. ON/OFF Button
Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, operation indicator " "on indoor unit’s
display is ON (green indicator.
The colour is different for different models), and indoor unit will give out a sound
