Gree ME30-24/D1, Руководство пользователя

Страница: 5 / 31

VRF Protocol Gateway
2
WARNING!
(4) Do not touch this device with wet hands; otherwise it would result in electric
shock.
(5) Do use the power cable specified in this manual; otherwise it would result in a
fire hazard.
(6) When the power cable is reversely connected or the power supply is beyond
the rated range, it would result in a fire hazard or even damages to this device.
(7) For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
(8) Do install this device inside the electric control cabinet which is located indoor
and then is locked.
(9) Do install this device where it will not be subject to the electromagnetic
interference or heavy dust.
CAUTION!
(1) Be sure the specified adaptor is used; otherwise this device would work
improperly or even be damaged.
(2) Be sure this device is setup in place; otherwise it would result in
communication fault.
(3) Be sure the communication line is connected to the correct interface;
otherwise it would result in communication fault.
(4) After connection, lines should be protected with insulating tape to avoid
oxidation and short circuits.
(5) Risk of explosion if battery is replaced by an incorrect type, dispose of used
batteries according to the instructions.
(6) Normal working conditions for Gateway
：
①
Temperature : -20
～
60
℃
;
②
Humidity: less than 85%,except for the condensation of dew;
③
Location: indoor (it is highly recommended to install this product in the electric
control cabinet), not subject to direct sunlight, rain and snow etc.
(7) Graphics in the instruction manual are for reference only.
3 Function and Parameter
3.1 Functional Overview
Gree protocol gateway ME30-24/D1(BM) for multi VRF unit can realize data