Gree KW09HQ3D6D Series, Руководство по обслуживанию

Страница: 23 / 96

20
Technical Information
Service Manual
2. FAN button
Press this button, Auto, Low, Medium-low, Medium, Medium-high, High speed can
speed is default. Under DRY
be circularly selected. After powered on, Auto fan
mode, Low fan speed only can be set up.
Medium fan Low fan
High fan
Medium-low fan
Medium-high fan
ATUO
● It’s Low fan speed under Dry mode.
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.
Having set X- FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for a few
minutes. at low speed. In this period, Hold fan speed button for 2s to stop indoor fan directly.
Having set X- FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.
X-FAN function ： Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is
operation for a few minutes in order to dry
displayed and the indoor fan will continue
the indoor unit even though you have turned off the unit. After energization, X-FAN
OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
●
●
●
Note:
When setting TIMER ON, TIMER OFF or CLOCK, press " + " or " - " button to
buttons) When setting
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF
TIMER ON, TIMER OFF or CLOCK, press " + " or " - " button to adjust time. (Refer to CLOCK, TIMER ON, TIMER
OFF buttons)
Press " + " or " - " button once increase or decrease set temperature 1°C(°F).
Holding " + " or " - " button, set temperature on remote controller will change
temperature indicator
quickly . On releasing button after setting is finished,
on indoor unit will change accordingly.
Press this button to set swing angle, which circularly changes as below:
This remote controller is universal. If it receives threes kinds of following status, the
button
OFF
5.TURBO button
5
Under Cool or Heat mode, press this button can turn on or turn off the Turbo function.
After the Turbo function turned on, the signal of Turbo will display. The signal will
Press this button to set left & right swing angle cycling as below:
be automatically cancelled if changing the mode or fan speed.
button
6.
7.
7.
OFF
3.MODE button
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto
4.+/- button
the initial value is 28
mode is default while power on. Under Heat mode,
Ƈ
(82 )
Ɖ
Under other modes, the initial value is 25
(only for cooling and heating unit. As for cooling only unit, it won’t have any action when it receives the signal of heating operation.)
AUTO COOL DRY
FAN HEAT
Ƈ
(77
Ɖ
).
swing angle will remain original.
If guide louver is stopped when it is swinging up and down, it will remian its present position.
indicates guide louver swings back and forth in the five places, as shown in the figure.
8
Press this button, the clock can be set up, signal blink and display. Within 5 seconds,
if continuously press this button for 2
the value can be adjusted by pr or - button,
seconds above, in every 0.5 seconds, the value on ten place ofMinutewill be increased 1.
During blinking, repress the Clock button or Confirm button, signal will be constantly
After powered on, 12:00 is defaulted to
displayed and it denotes the setting succeeded.
display and signal will be displayed. If there is signal be displayed that denotes
the current time value is Clock value, otherwise is Timer value.
CLOCK button
Timer On setting: Sign al “ON” will blink and display, signal will conceal, the num-
During 5 seconds blink, by
erical section will become the timer on setting status.
pr or - button to adjust the time value of numerical section, every press of
increased or decreased 1 minute. Hold pr or -
that button, the value will be
9
9.TIMER ON/TIMER OFF button
button, 2 seconds later, it quickly change, the way of change is: During the initial