２１
Install in the following place may cause malfunction. If it is unavoidable
contact with service center please.
coast exists.
Place where high-frequency waves are generated by radio equipment
,
welders and medical equipment.
Other place with special circumstance.
Installation location
Indoor unit
Outdoor unit
Select a location from which noise and outflow air emitted by unit will
not inconvenience neighbors.
Select a location where there should be sufficient ventilation.
The inlet and outlet should not be covered near the outdoor unit.
The location should be able to withstand the full weight and vibration
of the outdoor unit and permit safe installation.
There should be no danger of flammable gas or corrosive gas leaks.
Be sure that the installation conforms to the installation dimension
diagram.
The inlet and outlet should not be covered so that the outflow air
can reach all parts of the room.
Install in a location from which the condensation water can be drained
out conveniently and that is permitting easy connection with the outdoor
unit.
Avoid a location where there is heat source, high humidity or inflamm
able gas.
Install in a location where is strong enough to withstand the full weight
and vibration of the unit.
Ensure the indoor unit installation accord with the installation dimension.
Be sure to leave enough space to allow access for routine maintenance.
The indoor unit should be installed at 2.
3
m or higher above the floor.
Select a place about 1m or more away from the TV set or any other
electric appliances.
Select a place where the air filter can be easily taken out.
◆
1.
2.
3.
6.
8.
NOTE:
Place where machine oil is used.
The place where a lot of salinities such as
Place where a sulfured gas such as the hot spring zones is generated.
4.
5.
7.
9
.
Do not use the unit in the immediate surroundings of a laundry, a bath,
a shower or a swimming pool.
