Gree GWH09TB-S3DNA1D/I страница 24 Скачать руководство пользователя

Страница: 24 / 98

Service Manual

Technical Information

2. FAN button

Press this button, Auto, Low, Medium-low, Medium, Medium-high, High speed can be circularly selected. After powered on, Auto fan speed is
default. Under DRY mode, Low fan speed only can be set up.

3. MODE button

Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode is default while power on. Under Auto mode, the
temperature will not be displayed;Under Heat mode, the initial value is 28°C( 82°F);Under other modes, the initial value is 25°C(77°F).

4. +/- button

● Presetting temperature can be increased.
Press this button,the temperature can be set up, continuously press this button and hold for two seconds, the relative contents can quickly
change,until unhold this button and send the order that the °C(°F) signal will be displayed all the time.The temperature adjustment is unavilable
under the Auto mode, but the order can be sent by if pressing this button.Temperature of Celsius degree setting:16-30;for Fahrenheit degree

setting:61-86.

● Presetting temperature can be decreased.
Press this button, the temperature can be set up, continuously press this button and hold for two seconds, the relative contents can quickly
change,until unhold this button and send the order that the°C(°F) signal will be displayed all the time.The temperature adjustment is
unavailable under the Auto mode,but the order can be sent by if pressing this button.

5. TURBO button

Under Cool or Heat mode,press this button can turn on or turn off the Turbo function.After the Turbo function turned on, the signal of Turbo will
display. The signal will be automatically cancelled if changing the mode or fan speed.

6. button

Press this button to set left & right swing angle cycling as below:

7. button

Press this button to set swing angle,which circularly changes as below:

This remote controller is universal. If it receives threes kinds of following status,the swing angle will remain origial.

If guide louver is stopped when it is swinging up and down,it will remain its present position.
indicates guide louver swings back and forth in the five places,as shown in the figure.

8. CLOCK button

Press this button, the clock can be set up,signal blink and display.Within 5 seconds, the value can be adjusted by pr or - button,
if continuously press this button for 2 seconds above,in every 0.5 seconds, the value on ten place of Minute will be increased 1.During
blinking,repress the Clock button or Confirm button,signal will be constantly displayed and it denotes the setting succeeded. After powered
on, 12:00 is defaulted to display and signal will be displayed. If there is signal be displayed that denotes the current time value is Clock
value, otherwise is Timer value.

9. TIMER ON/TIMER OFF button

● Timer On setting: Signal “ON”will blink and display,signal will conceal,the numerical section will become the timer on setting status.
During 5 seconds blink,by pr or - button to adjust the time value of numerical section,every press of that button,the value will be
increased or decreased 1 minute.Hold pr or - button,2 seconds later,it quickly change,the way of change is: During the initial 2.5
seconds,ten numbers change in the one place of minute,then the one place is constant,ten numbers change in the ten splace of minute at 2.5
seconds speed and carry. During 5s blink,press the Timer button,the timer setting succeeds.The Timer On has been set up,repress the timer
button,theTimer On will be canceled. Before setting theTimer,please adjust the Clock to the current actual time.
● One press this key to enter into TIMER OFF setup, in which case the TIMER OFF icon will blink. The method of setting is the sameas for

TIMER ON.

Note: Its Low fan speed

under Dry mode.

(only for cooling and heating unit.
As for cooling only unit, it wont
have any action when it receives
the signal of heating operation.)

Medium fan

Low fan

High fan

Medium-low fan

Medium-high fan

ATUO

AUTO

COOL