15
Technical Information
Service Manual
7.
TEMP button
8.
TURBO
button
9. I FEEL button
10.
Timer
button
11. X-FAN button
12. LIGHT button
NOTICE:
Press this button, you can see indoor set temperature, indoor ambient temperature on indoor unit’s display. The setting
on remote controller is selected circularly as below:
no display
Press this button to activate / deactivate the Turbo function.
Press this button to turn on I FEEL function.
Under ON status, press this button to set timer OFF; Under OFF status, press this button to set timer ON.
Turn on the display's light and press this button again to turn off the display's
light.
As for the detailed content of remote controller, please refer to QR code on the cover.
Function introduction for combination buttons
Press " " and " " buttons simultaneously 3s to lock or unlock the keypad. If the remote
pressing any button, blinks
three times.
controller is locked, is displayed. In this case,
▲
Combination of " " and " " buttons: About lock
▲
▲
▲
About switch between Fahrenheit and centigrade
Combination of "MODE" and " " buttons:
▲
At unit OFF, press "MODE" and " " buttons simultaneously to switch between
ć
and
̧
.
▲
Nixie tube on the remote controller displays
"
SE". Repeat the operation to quit the function.
Combination of "TEMP" and "TIMER" buttons: About Energy-saving Function
Press "TEMP" and "TIMER" simultaneously in COOL mode to start e nergy-saving function.
(46
̧
if Fahrenheit is adopted). Repeat the operation to quit the function.
Combination of "TEMP" and "TIMER" buttons: About 8
ć
Heating Function
Press "TEMP" and "TIMER" simultaneously in HEAT mode to start 8
ć
Heating Function Nixie tube on the remote controller displays " "
and a selected temperature of "8
ć
".
(NOTE:X-FAN is the alternative expression of BLOW for the purpose of understanding.)
