Remote controller description
ON/OFF :
MODE :
+
:
FAN :
1
2
4
3
5
Operation of Remote Controller
7
Press this button to turn on the unit
.
Press this button again to turn off the unit.
Each time you press this button,a mode is selected in a sequence that goes from AUTO,
COOL, DRY, FAN,and HEAT
*
, as the following:
AUTO
COOL
DRY
FAN
HEAT
*
*Note: Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not
be displayed on the LCD, and the unit will automatically select the suitable operation
mode in accordance with the room temperature to make indoor room comfortable.
Press
this button to decrease set temperature. Hold it down for above 2 seconds to
rapidly decrease set temperature. In AUTO mode, set temperature is not adjustable.
Press this button to increase set temperature. Hold it down for above 2 seconds to
rapidly increase set temperature. In AUTO mode, set temperature is not adjustable.
This button is used for setting fan speed in the sequence that goes from AUTO,
to
then back to Auto.
,
,
,
Auto
Low speed
Medium speed
High speed
:
6
simple swing and static swing;
blinks for 2 seconds.
In static swing condition, pressing
If the unit is turned off during swing operation,the louver will stop at present position.
button, the swing angle of up & down louver
changes as below:
●
●
●
●
Press button to start or stop up & down swing function.The remote controller
Press + button and button at the same time at unit OFF to switch between
defaults to simple swing condition.
