)XQFWLRQDQG&RQWURO
Remote control
buttons of this control which are not available to this unit will not be described below.
This wireless remote control is universal, and it could be used for many units, some
●
One press this key to enter into TIMER
OFF setup, in which case the TIMER OFF
icon will blink. The method of setting is the
sameas for TIMER ON.
TIMER OFF
TIMER OFF button
SWING LEFT AND RIGHT BUTTON
●
Press this bu tt on to set swing angle,
which circ ul arly chang es as below :
OFF
This remote controller is universal. If it
receives threes kinds of following status,
the swing angle will remain origial.
If guide louver is stopped when it is
swinging up and down,it will remain its
present position.
indicates guide louver swings back and
forth in the five places,as shown in the
figure.
SWING UP AND DOWN BUTTON
●
Press this button to set left & right swing angle
cycling as below:
OFF
TIMER ON
TIMER ON BUTTON
●
I FEEL BUTTON
●
●
Press this button once, to turn on the
I FEEL function , then the figure of "I FEEL"
will be displayed, after every press of
I FEEL
other function button, every 200ms to send
I FEEL once, after this function started,
the remote control will send temperature
to the main un it in every 10 minutes.When
repress this button, this function will be
turned off.
HEALTHY AND SCAVENGING BUTTON
and “ ” .
/
Timer On setting: Signal “ON”will blink and
display,signal will conceal,the numerical
section will become the timer on setting status.
During 5 seconds blink,by pressing
or
button
to adjust the time value of numerical section,
every press of that button,the value will be
increased or decreased 1 minute.Hold pressing
or
button,2 seconds later,it quickly change,
the way of change is: During the initial 2.5 seconds,
ten numbers change in the one place of minute,
then the one place is constant,ten numbers
change in the ten splace of minute at 2.5 seconds
speed and carry. During 5s blink,press the
Timer button,the timer setting succeeds.The
Timer On has been set up,repress the timer
button,theTimer On will be canceled. Before
setting theTimer,please adjust the Clock to the
current actual time.
Press this button to achieve the on and
off of healthy and scavenging functions in
operation status.Press this button for the
first time to start scavenging function;
LCD displays“ ”.Press the button for the
second time to start healthy and scavenging
functions simultaneously;LCD displays“ ”
Press this button for the third
time to quit healthy and scavenging functions
simultaneously.Press the button for the
fourth time to start healthy function; LCD
display“ ” .Press this button again to
repeat the operation above.
