Gree GWC18KG-K3DNA5A, Руководство по обслуживанию

Страница: 30 / 101

27
Function and Control
Press + button and button at the same time at unit OFF to switch between simple swing and static swing,
blinking 2 seconds.
In static swing condition, press button, the swing angle of left & right louver changes as below:
Pressing X -FAN button in COOL or DRY mode,the icon "X-FAN" is displayed and the indoor fan will continue
operation for 10 minutes in order to dry the indoor unit even though you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO,FAN or HEAT mode.
Pressing TEMP button, (set temperature), (indoor ambient temperature) and (outdoor
ambient temperatur) is displayed circularly .The unit defaults not to display the icon. During operation of TEMP
button, the set temperature is always displayed.
Note: Outdoor ambient temperature is only displayed for some models.
Press TIMER button at unit ON to set TIMER OFF, HOUR OFF blinking. Press TIMER button at unit OFF to set TIMER
ON, HOUR ON blinking. In this case, pr or - button changes time setting.
Holding down either button rapidly changes time setting (time setting range 0.5-24hours). Press TIMER button again to
confirm setting, HOUR ON/OFF stopping blink. If there is not any operation of button within 5 seconds during HOUR
ON/OFF blinking, TIMER setting will be canceled.
X-FAN:
TEMP:
TIMER:
TURBO:
9
10
11
●
●
If the unit is turned off during swing operation,the louver will stop at present position.
●
12
Press this button to activate / deactivate the Turbo function which enables the unit to reach the preset
temperature in shortest time. In COOL mode, the unit will blow strong cooling air at super high fan speed.
In HEAT mode, the unit will blow strong heating air at super high fan speed. (This function is not applicable for
some models).
SLEEP :
13
Press this button to go into the SLEEP operation mode. Press it again to cancel. This function is available in COOL ,
HEAT (Only for models with heating function) or DRY mode to maintain the most comfortable temperature for you.
LIGHT:
14
and About lock:
4 3
Press LIGHT button to turn on the display's light and press this button again to turn off the display's light. If the light
is tunrned on , is displayed. If the light is tunrned off disappears.
Press "+ " and "-" buttons simultaneously to lock or unlock the keypad. If the remote controller is locked, is
displayed. In this case, pressing any button, blinks three times.
and About switch between fahrenheit and cenrigrade
3 2
At unit OFF, press "MODE" and "- " buttons simultaneously to switch between ℃ and ℉．