22
Remove Collected Water: Continuous
Drainage Lower Hole Option
•
Turn off and unplug the unit before draining.
•
Move the unit to a suitable place, keep the unit vertical.
•
Take the
Drainage Hose
from the
Pipe Clip
, and pull out the
Rubber Plug
in the
Drainage Hose
to discharge the water.
•
After discharging the water, replace the
Rubber Plug
in the
Drainage Hose
and then place the
Drainage Hose
onto the
Pipe Clip
.
•
After the water is removed, and the compressor has been stopped for 3 minutes,
the unit will resume operation.
CLEANING AND MAINTENANCE
NOTE:
During cooling or drying operations, water will condense and drain into the chassis.
When the chassis is full with water, a buzzer will sound and “H8” will display on the unit.
The unit will shut off.
