1). To select a place near the door and window, install the exhaust duct.
2). Press "MODE"key to select"COOL" mode.
3).Press
key to set the suitable temp.
or
When the unit is running in the COOL mode, in order to keep the good cooling effect,
pleasepaymoreattentionto:
1) If
there is the direct sunlight near the window, please use the curtain to shield .
2) Do
not use other heat sources in the air conditioner room.
Pleaseclosethedoorandwindow,inordertoobtain the better dehumidifying effect:
Press "MODE" key, select the "DRY" mode, the unit will run in the "DRY" mode, at the
sametime,theuppermotorisrunning at thelowspeed,itisnot adjustable.
COOL mode
1). Press “MODE ” key to select “HEAT”mode .
2). Press
HEAT
(not for only
cooling unit )
mode
CAUTION
DRY mode
When the unit runs in FAN mode, it can select 3 speeds.
FAN mode
When the tanks gets full
GPH12AE-A3NNA8A:HEAT light ) will flash and the buzzer will sound eight times,
the indicator(GPC12AE-A3NNA8A:WATER FULL light ;
LED window shows error code “ H8 ”, at the same time the unit stop running. We should
drain off the water .
WATER
DRAINAGE
"
"
"
"
- 6-
OPERATING METHODS
16
℃
( 61 )
～
30
℃
86
.
°F
°F
key to set the suitable temp.
or
"
"
"
"
16
℃
( 61 )
～
30
℃
86
.
°F
°F
