background image

Multi Variable Air Conditioners Floor and Ceiling Type Indoor Unit

19

6 Routine Maintenance

 Warning:

① 

This appliance can be used by children aged from 8 years and above and persons with 

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have 
been given supervision or instruction concerning use of the appliance in a safe way and understand 
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall 
not be made by children without supervision. 

② 

Do turn off the unit and cut off the main power supply when cleaning the air conditioner to 

avoid electric shock or injury.

③ 

Stand at solid table when cleaning the unit.

④ 

Do not clean the unit using hot water of over 45°C to prevent the unit from losing color or 

deforming.

⑤ 

Do not dry the filters by fire, or it may catch fire or become deformed.

⑥ 

Clean the filter with a wet cloth dipped in neutral detergent.

⑦ 

Please contact after-sales service staff if there is abnormal situation.

6.1 Cleaning of Filter

(1) 

Remove the air filter on the air inlet for cleaning. Use a dust catcher or water to clean it. If the 

filter is very dirty(e.g. greasy), you can clean it using warm water(below 45°C) that is mixed 
with mild detergent. Then let it dry naturally in cool places;

(2) 

If the air conditioner is used in dusty place, please clean the air filter regularly (generally once 

every 2 weeks).

6.2 Maintenance before the Seasonal Use

(1) Check if the air inlet and air outlet of indoor and outdoor unit are blocked.
(2) Check if the grounding wire is in good condition.
(3) Check if all the power cord and communication cable are securely connected.
(4) Check if any error code displayed after energized.

6.3 Maintenance after the Seasonal Use

(1) Set the unit in fan mode for half a day in a sunny day to dry the inner part of unit.
(2) 

When the unit won’t be used for a long time, please cut off power supply for energy saving; 

the characters on the wired controller screen will disappear after cutting off the power supply.

Содержание GMV-ND112ZD/A-T


























Отзывы: