Gree GMV-ND07T/A-T(U), Руководство пользователя

Страница: 19 / 28

Multi Variable Air Conditioners Cassette Type Indoor Unit
14
4.4.2 Panel Installation
(1) Detach the panel’s Corner Cap, there is a mark “piping side” on one of the 4 corners,
adjust the panel direction so as to keep the mark and fittings on the same corner .
(2) Temporality hang the panel to body (there is four hangers on each corner of the panel,
hang the hangers to corresponding hooks on the body), as shown in fig 4.4.4.
(3) Detach the air inlet grille from panel, make a wiring connection of signal receiver. Notices
that the connection wire not stuck in the middle of body and panel, or may cause air
leakage and lead to condensation water drop.
(4) Tighten 4 screws at each corner of panel respectively, fix the panel on the body firmly.
(5) After tightening screws, reinstall the air inlet grille.
Fig 4.4.4.
4.5 Installation of Wired Controller
Please refer to User Manual of Wired Controller for the installation details.
NOTICE
!
When installation is finished, the unit must be tested and debugged before
operation. Please refer to Instruction Manual of ODU for auto addressing and debugging
details.