Gree GMV-224WL/C-X, Руководство пользователя

Страница: 34 / 36

DC Inverter Multi VRF System
30
Error Code Content Error Code Content
H1
Driving board of fan operates abnormally
(uniform)
H2
Voltage protection of driving board power of
fan (uniform)
H3 Reset protection of driving module of fan H4 Drive PFC protection of fan
H5 Over-current protection of inverter fan — —
Debugging:
Error Code Content Error Code Content
U0 Preheat time of compressor is insufficient U2
Wrong setting of ODU’s capacity
code/jumper cap
U4 Refrigerant-lacking protection U5
Wrong address for driving board of
compressor
U6 Alarm because valve is abnormal U8 Short-circuit malfunction of IDU
U9 Malfunction of pipe-line for ODU UC Setting of main IDU is successful
UL Wrong button-dial UE Charging of refrigerant is invalid
C0
Communication malfunction between
IDU, ODU and IDU’s wired controller
C2
Communication malfunction between main
control and inverter compressor driver
C3
Communication malfunction between
main control and inverter fan driver
C4 Malfunction of lack of IDU
C5
Alarm because project code of IDU is
inconsistent
C8 Emergency status of compressor
C9 Emergency status of fan CH Rated capacity is too high
CC Malfunction of lack of main control unit CL Rated capacity is too low
CF Malfunction of multiple main control units CJ Malfunction of multiple main wired controllers
CP
Malfunction of multiple main wired
controllers
CU
Communication malfunction between IDU
and the receiving lamp plate
Cb Overflow distribution of IP address — —
Status:
Error Code Content Error Code Content
A0 Unit waiting for debugging A1 Inquiry of compressor operation parameters
A2
Refrigerant recovery operation of
after-sales
A3 Defrosting
A4 Oil-return A5 Online test
A6 Heat pump function setting A7 Quiet mode setting
A8 Vacuum pump mode A9 IPLV test
AA EU AA level EER test mode AH Heating
AC Cooling AL Charging refrigerant automatically
AE Charging refrigerant manually AF Fan
AJ Alarm for cleaning filter AP Debugging confirmation for startup of unit
AU Long-distance emergency stop Ab Emergency stop of operation
Ad Limit operation n0 SE operation setting of system
n1 Setting of defrosting cycle K1 n2
Setting of upper limit of IDU/ODU capacity
distribution ratio
n4
Limit setting for max. capacity/output
capacity
n6 Inquiry of project code of IDU
n7 Inquiry of malfunction n8 Inquiry of parameters
nA Heat pump unit nH Heating only unit
nC Cooling only unit nE Negative sign code
nF Fan model — —
8 Maintenance and Care
Regular check, maintenance and care can extend unit’s service life. Please have specialized
person in charge of the management of air conditioners.