Note:
This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen’t have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
1
ON/OFF button
2
MODE button
3
4
FAN button
5
I FEEL button
6
SLEEP button
+ / - button
7
TIMER button
1
ON/OFF button
2
MODE button
2
3
5
7
6
4
3
1
Each time you press the button, a mode is selected in a sequence that goes from
AUTO, COOL, SAVE, FAN and DRY, as the following:
COOL
AUTO
DRY
FAN
SAVE
Press this button to turn on the unit,turning on the unit with remote controller, the
unit will operate in energy-saving mode. Press this button again to turn off the unit.
NOTE: If energize the unit, turn it on, turn it off and then turn it on, the unit will operate
in energy-saving mode; if the unit is energized after power failure, the unit will still
operate according to the status before power failure.Under off status, the complete
unit doesn’t respond to turning on the unit with remote controller under any mode other
than energy-saving mode. In this case, the buzzer will give out two sounds for error
indication. You need to turn off the unit and then turn it on with remote controller or
switch to energy-saving mode after turning on the unit with remote controller.
9
Introduction of remote controller
