background image

T

rouble shooting guide

Fault phenomenon

Trouble-shooting

Air conditioner dose not

operate at all.

* Is there a power failure?

* Is the plug out?

* I

s power fuse or switch off ?

Whether the voltage is too high or too low?

* Is air inlet or outlet locking?

* Is there any other heat

/cool

 source in room?

* Are air filters dirty very much?

* Is indoor fan speed set at LOW?

* Maybe the room is too 

hot/cool

 when the unit is

started.

* At COOL mode operation, sometimes there is foggy

air flowing out of indoor unit, this is because the room

humid air has been cooling rapidly.

* The unit is normal while the indoor outlet is sending

out some odor, because the inlet air may be mixed

with the smell of furniture and smoke.

* For a noise that sounds like water flowing:

This is the sound of freon flowing inside the air con-

ditioner unit.

* For a noise that sounds like a shower:

This is the sound of the dehumidifying water being

processed inside the air conditioner unit.

* Condensation occurs when the airflow from the air

conditioner cools the warm room air.

* This is to protect the mechanism.

* Wait about three minutes and operation will begin.

Cool

 or heat

 efficiency is

not 

good.

F o g g y   a i r

flows out.

The air conditioner opera-

tion is noisy.

It seems that condensation is leaking from air conditioner.

Air conditioner dose not operate for about 3 

m

inutes when

restart.

Please check the following items before asking for repair,it saves your time and

money.

1

7

Содержание GJC07AB-K3MNB8A






















Отзывы: