6
3
Fan Button
4
UV Button
WiFi Button
6
Display
5
Other Instructions
1.
2. Auto Stop
Alarm Warning
If bucket is full or not locked into place for over 3min, buzzer will beep for 10s
to remind you to empty bucket or put it back into the correct place.
When bucket is full, removed or not placed correctly or the humidity is 5%lower
than the set humidity, unit will automatically stop.
Press this button can freely switch from high fan speed to low fan speed.
When you need fast dehumidification, select high fan speed; when you need
the unit to work quietly, select low fan speed.
Hold this button for 3S to enter or exit child lock status. When the unit enters
child lock status, the display window will flash “LC” 3 times; at this time,
pressing other buttons will be invalid and “LC” will be displayed.
Whether the unit is turned on or turned off, press WiFi button can turn on or
turn off WiFi function;
Whether the unit or WiFi is turned on or turned off, hold WiFi button for 5s
can reset WiFi. At the same time, WiFi function will be turned on.
Under on status, hold combination button (uv fan button) for 3s can
turn on or turn off the nixie tube.
The humidity display window is defaulted to display current environment hu-
midity. If press humidity button to adjust the humidity, it will display the set
humidity. 5s later, it will turn back to display the ambient humidity.
Under dehumidification mode, it’s defaulted that UV function is turned on.
Press this button once only to turn off or turn on the UV function. Hold this
button for 3S to enter or exit single UV mode. Under single UV mode, the
dehumidification function will be off, and the display window will display “- -”.
Fan
UV
Fan
UV
WiFi
7
Combination button
+
