background image

12

Light indicates the unit is in the 
temperature or delay Time Set Mode

REF#

BUTTON

FUNCTION

1

 

Power

Turns air conditioner On and Off. 

2

Mode

Press this button to select a mode from the following options: 
AUTO - COOL - ENERGY SAVER - FAN - DRY

3

Fan Speed

Press this button to select desired fan speed:
AUTO - LOW - MED - HIGH

4

Timer

Timer can be set in 0.5 hour increments, below 10 hours. Timer can be set in 1 hour 
increments, above 10 hours. Range is 0.5 to 24 hours. 

ON:

 Timer can be set when unit is OFF. When timer reaches ON, the unit will turn on.

OFF:

 Timer can be set when unit is ON. When timer reaches OFF, the unit will turn off.

5

Filter Check

This light will appear when unit has operated for 250 hours. Clean filter per Maintenance section. After 
filter is cleaned, press Filter Check button to clear.

6

 

COOL or ES Mode:

 Use to set temperature. Pressing (

) or (

) button once will increase 

or decrease set temperature by 1°F.

TIMER Mode:

  Use to increase/decrease time increments by 0.5 hours.

OPERATING INSTRUCTIONS

Function & Control Display

DESCRIPTION

FUNCTION

Auto Fan Mode

In this mode, fan speed will automatically adjust to provide optimum comfort with the set temperature.  
Cannot be used when in FAN only mode.

Cool 

Mode

Air conditioner operates under COOL mode. Cooling indicator will be on. 
Press 

Fan Speed 

button to adjust the fan speed.

Energy 

Saver 

Mode

Air conditioner operates under ES mode. ES indicator will be on. Press Fan Speed button to adjust the 
Fan speed.

Fan Only Mode

Fan Speed button to adjust the Fan speed. Air Conditioner does not cool in this mode.

Dry Mode

Unit runs in low fan speed for dehumidification. DRY Mode indicator will be on. Fan speed cannot be 
adjusted.

Display

Shows the room temperature or time remaining on the Delay Timer. Shows the room 
Temperature while setting the temperature in COOL, DRY*or ENERGY SAVER modes.

Cooling indicator

SE indicatorfan

Fan indicator

Dry indicator

2

3

6

7

Auto speed indicator

High speed indicator
Medium speed indicator
Low speed indicator

1

4

5

Auto
High
Med
Low

Cool
Energy Saver
Fan Only
Dry

Mode

Set

Temp/Time

POWER

Timer

Filter Check

Fan

Speed

Содержание G17-6ESCWAC1






















Отзывы: