8
1
2
3
INSTALLATION INSTRUCTIONS
NOTICE:
This picture is for reference only. Please refer to the actual product for the appearance.
Pull down the Front Panel slightly, and lift panel
upwards to remove.
Remove 4 Screws from Front Frame.
Set aside, you will need later during
installation
.
Remove 2 Screws from the Control Cover.
Set aside, you will need later during installation
.
Grasp the lower corners of the Front Frame while
pressing in on the sides with your fingertips. Pull
out to release and lift up carefully.
Remove Filter.
Note:
When Front Frame is removed, Control
Panel will still be attached by a harness.
Note:
Do NOT pull the bottom edge towards
you more than 3”, or you may damage the
tabs on top of Frame
Front Case
Screws
Screws
Screw
Preparing Unit and Case
