5
INSTALLATION INSTRUCTIONS
CAUTION
When handling the unit be careful to avoid cuts from any sharp metal edges
and the aluminum fins on the front / rear coils.
IMPORTANT
:
Save these instructions for future reference.
Product failure due to any improper installation is not covered under the One Year Limited Warranty.
IMPORTANT:
You MUST use the parts provided for installation as well as proper installation
procedures as described in this manual when installing this unit.
WARNING
•
Observe all electrical governing codes and ordinances.
•
Do not use damaged or non-standard power cords.
•
Use caution during installation and maintenance.
•
Use proper operation to prevent electric shock, casualty and other accidents.
•
Proper installation is the responsibility of the installer. If not installed properly the warranty is void.
•
All parts described must be used with no substitutions.
Selection of Installation Location
Installing the unit in the following places can be dangerous and may cause malfunction:
1. Areas with strong heat sources, vapors, flammable or explosive gas, sulfated gas or volatile objects
spread in the air.
2. Near high-frequency devices such as welding machines, medical equipment, etc.
INSTALLATION INSTRUCTIONS
Requirements for Electric Connection
•
Follow the Electric Safety Information when installing the unit.
•
According to your local safety regulations, use a qualified power circuit.
•
Do not plug into an outlet if it is loose or damaged. It may cause electric shock.
•
Please make sure the power supply complies with the requirement of air conditioner. Unstable power
supply or wrong wiring may lead to electric shock, hazard or malfunction. Note: Electricity requirements
are 115V (60 Hz).
•
Do not connect to the power outlet before finishing installation.
•
Please make sure the outlet is always grounded effectively, otherwise it may cause electric shock.
The grounding resistance should comply with national electric safety regulations.
Before You Begin
