GREE ELECTRIC APPLIANCES, INC.OF ZHUHAI
Page 4
TIMER
TIMER button
Remote control
+ button
●
Press this button to adjust the set temperature
upward when unit is On. Continuously holding
this button for more than 2 seconds,
the set temperature values will change rapidly,
until the button is released. The set
temperature will be displayed in °F or °C.
Note, in Auto mode, the room temperature
cannot be set.
●
By pressing this button in the Off state, you may
set a time period for auto turn On. The range of
setting is 0.5 ~ 24 hours. The characters "T-ON"
and "H" will flash for 5 seconds. Within 5
seconds, you must press a button to complete the
setting. If the setting is valid, the set time will be
displayed for 2 seconds before display reverts
to set temperature. During flash, you may
press "+" button to increase the value and press
"-" button to decrease the value. The time will
increase or decrease by 0.5 hours with each press
of this button. If pressing "+" or "-" button
continuously, the time value will change rapidly.
The remote controller can increase the set time
by 0.5 hours every 0.25 seconds. After being
energized, the default is no timer setting, and there
is no display of "T-ON" or "H". Press ON/OFF
button to turn On the unit and cancel the auto
Turn On. When the temperature display becomes
constant, you may press this button again to
display the remaining set time. The time value,
"T-On" and "H" will display constantly for 2
seconds. After 2 seconds, the set temperature
will be displayed. Within these 2 seconds, you
may press this button again to cancel the auto
turn On.
●
By pressing this Button in the On state, you
may set the time for auto Turn Off. The
method of setting is the same as for auto Turn
On above.
Centigrade setting range :16-30 °C
Fahrenheit setting range: 61-86 °F
- button
●
Press this button to adjust the set temperature
downward when unit is in the On state.
Continuously holding this button for more
than 2 seconds, the set temperature values
will change rapidly, until the button is
released. The set temperature will be
displayed in °F or °C.
Note, in Auto mode, the room temperature
cannot be set.
