Gree Cooling Bay GVCN18AANK1A1A, Руководство пользователя, Страница: 27 / 73

6.1.2.4 Fan mode
I
ndoor fan runs at preset speed
:
6.1.2.5 Auto Mode
Under this mode, the system will automatically select its run mode (cool, dehumidify, heat or fan) with the change of
ambient temp
.
6.1.3.Other Control
Stop Run
During defrosting
Outdoor fan
Indoor fan
Switchover valve
Compressor
12min.
6.1.2.3.3 Protection Function
High Temp Protection in Room
If indoor temp is detected to be too high, outdoor fan stops running.When the temp resumes normal,outdoor fan starts.
Overcurrent Protection
This protection is the same as that under cooling mode.
Auto speed Low Medium High
Super high
Under this mode, temp setting range is 16-30 .
℃
Once each mode is started, it must run for 30s at least and then the unit switches to the ruuning state under auto mode
according to ambient temp.
6.1.3.1 Sleep Function
If the controller is under cooling or dehumidifying mode, the preset temperature will be increased by 1 one hour
℃
after running under sleep mode and will be increased by another 1 after two hours. The temperature will increased
℃
by 2 within two hours. After that, the unit will run at this temperature.
℃
Set
ting
Temperature T
preset
T
preset
+2
℃
T
preset
+1
℃
T
preset
2 hours Over 2 hours
1 hours
If the controller is under heating mode, the preset temperature will be decreased by 1 one hour after running under
℃
sleep mode and will be decreased by another 1 after two hours. The temperature wi
℃
ll decreased by 2 within two
℃
hours. After that, the unit will run at this temperature.
T
preset
B
T
preset
-1
℃
T
preset
-2
℃
1 hour 2 hours Over 2 hours
Setting Temperature T
preset
6.1.3.2 Timer ON/OFF Function
6.1.3.1 Timer ON
TIMER ON function can be set when the unit is at off mode .
At the time for Timer ON
, the controller will run under
preset mode. The interval of time setting is 0.5h
if timer setting is below 10hr and 1hr if timer setting is above 10hr. The
TIMER OFF function can be set when the unit is at on mode .
At the time for Timer OFF
, the system will be stopped.
The interval of time setting is 0.5h if timer setting is below 10hr and 1hr if timer setting is above 10hr. The setting range
.
setting range is 0.5-24h.
is 0.5-24h.
6.1.3.2 Timer OFF
２７