Safety advice
Please read carefully
Contents
Caution
Increasing boost levels is a practice that is not advised by original
equipment automobile manufacturers. While doing so will lead to more
power output, it can very well lead to engine damage or complete engine
failure if done improperly. The addition of more power to any vehicle
requires due caution while the driver becomes acclimated. TRUST Co.,LTD.
and its subsidiaries are not liable for any damage or injury that may arise
from the use of the device.
Depending on the vehicle, some applications will trigger a “fuel cut” when
raising the boost pressure, in these circumstances, you need an e-manage
or similar unit to the control fuel cut.
Incorrect wiring could lead to damage to your cars electrical system.
Be sure to verify that all the sensors are installed using sealing tape. After
installation of sensors, be sure to check for leaks such as oil, coolant and/or
fuel.
Do not disassemble the product. Doing so will lead to the forfeit of
warranty coverage.
When making wire connections, be sure to remove the key from the
ignition, and disconnect the negative terminal of the battery.
Do not install in electrically noisy environments such as ignition signal
areas. This could lead to sensor glitch or malfunction.
