manualshive.com logo in svg

GreatSpeed GS-R250S Plus/Duo, Инструкция по установке и справочник команд

Поделиться
Скачать
GreatSpeed GS-R250S Plus/Duo Скачать руководство пользователя страница 33

33

Experience the Internet @ GreatSpeed

GS-R250S Installation Guide

Routed PPP Over Ethernet (RFC2516) Setup

When configured for PPP, data is routed between Ethernet and PPP over Ethernet. The PPP data runs over a
PVC between the Client Access Device and the service provider. The PVC, username and password need to be
determined by the service provider and the IP address and remote gateway for the WAN port will be assigned
by the ISP dynamically when the connection is established. Since the modem is routing, an IP address needs
to be assigned on the Ethernet interface of the router. The PCs default gateway must be set to the Ethernet IP
address of the router.

       PCs

       DSLAM & Access Concentrator

     subnet1

       subnet2

192.168.4.1 ~                                                       server : 192.168.1.3
192.168.4.99                                                DHCP IP range : 192.168.1.254

gateway : 192.168.4.254

       ADSL Router

                               Ethernet interface :      PPP device :

         192.168.4.254         PVC : 0/35

The “ADSL ROUTER Configuration Utility” window will require you to enter your settings.
Enter the Ethernet IP address and NET MASK. You also have option to enable or disable NAT functionality.
Then click 

Next

.

Select your ADSL line mode. By default, you should select Multi Mode. Then click Next.

1

2

Содержание GS-R250S Plus/Duo































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды