Greatneck 80167, Руководство пользователя

Страница: 7 / 21

 Use the charger only in a standard
110–120 V 60 Hz electrical outlet .
 Charge the battery only with the
charger supplied with the drill .
 Do not use the charger in wet or
damp conditions . It is intended for
indoor use only. Do not use the
charger near sinks or tubs. Do not
immerse the charger in water.

Do not allow the cord to hang over
the edge of a table or counter or
touch hot surfaces . The charger
should be placed away from sinks and
hot surfaces.
 Do not use charger to charge any
batteries other than the drill
batteries . Other batteries may
explode.
 Do not operate charger if cord or
plug is damaged . Replace damaged
cord and plug immediately.
 Do not operate charger if it has
received a sharp blow , been dropped
or otherwise damaged in any way.
Have a qualified technician examine
the charger and repair it if necessary.
Do not disassemble the charger.
 For best results, only charge the
battery when the temperature range of
the battery or work area is between
10–40°C (50–105°F).
 Unplug the charger when not in use
and before cleaning or maintenance.
 Do not abuse the cord . To reduce the
risk of damage to the electric cord or
plug, never carry the charger by the
cord or yank the cord to pull the plug.
Always grasp the plug and pull to
disconnect. Always keep the cord
away from heat, oil and sharp edges.
7
BATTERY & CHARGER SAFETY