Greatneck 80134 Скачать руководство пользователя страница 1

ROTARY TOOL

06/15

2015 GREATNECK

Operating Instructions and Parts Manual 

80134

®

UNPACKING

After unpacking unit, inspect carefully 
for any damage that may have occurred 
during transit. Check for loose, missing, 
or damaged parts. If any damage is 
observed, a shipping damage claim 
must be filed with carrier. Do not use the 
GreatNeck

®

 Rotary Tool if broken, bent, 

cracked or damaged parts (including 
labels) are noted. Any Rotary Tool that 
appears damaged in any way, operates 
abnormally or is missing parts should 
be removed from service immediately. 
If you suspect that the Rotary Tool was 
subjected to shock load (a load that was 
dropped suddenly, unexpectedly, etc.) 
immediately discontinue use until it has 
been checked by a factory authorized 
service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. 
Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with 
instructions could result in personal injury and/or damage to product or property. Please retain instructions for 
future reference.

The following safety information is provided as a guideline to help you operate your Rotary Tool under the safest 
possible conditions.  Any tool or piece of equipment can be potentially dangerous to use when safety or safe 
handling instructions are not known or not followed. The following safety instructions are to provide the user with 
the information necessary for safe use and operation. Please read and retain these instructions for the continued 
safe use of your tool. Failure to follow instructions listed below may result in serious injury. In addition, make 
certain that anyone that uses the equipment understands and follows these safety instructions as well.

WARNING

Explanation of Safety Signal Words

 WARNING

:  

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious 
injury.

 

 CAUTION

:

  Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate 

injury.

       CAUTION

:

  Used without the safety alert symbol indicates a potentially hazardous situation which, if not 

avoided, may result in property damage.

          NOTES

:

 

Provide clarity and helpful information.

Содержание 80134









Отзывы: