7
Flame button
The fire has four flame effects and a standby, by pressing the flame effect button the unit will cycle through
each condition.
Heater button
Press once turns 650W power on. (Pilot lights illuminated
●○
)
Press again turns 1300W power on (Pilot lights illuminated
●●
)
Press third time turns heater off. (Pilot lights illuminated
○○
)
To Reset the Heater
Your heater includes a protection system that shuts off the heater if it overheats for any reason:
1) Turn unit to off.
2) Wait 5 minutes.
3) Turn on.
●
Remote control functions
In order to protect the product from becoming too hot, there is an 8s delay when turning on the heater;
also there is an 8s delay when turning off the heater fan.
Make sure the batteries are installed properly in the remote control.
The effective range of the remote control is up to 13 feet (4 meters) .
ICON
TITLE
FUNCTION
POWER
Press once turns appliance and flame effects on. Press
again turns appliance and flame effects off.
FLAME
The fire has four flame effects, by pressing the flame
effect button the unit will cycle through each effect.
HEATER
Press once turns 650W power on. (Pilot lights
illuminated
●○
)
Press again turns 1300W power on (Pilot lights
illuminated
●●
)
Press third time turns heater off. (Pilot lights illuminated
○○
)
TEMP
Digital display shows the TEMP setting 23°C (73°F)
(default), with 14 settings circle from “OFF”, “16°C”
to ”28°C” (61°F to 82°F).
The TEMP will increase by 1°C/F up to 28°C(82°F) when
pressed each time.
By pressing the TEMP for 3S, the digital display can
switch between °C and °F.
TIMER
Cycles from OFF, 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H,8H,
to 9H.
