GREAT PLAINS YP2425, Руководство оператора

Страница: 42 / 166

2016-11-16 Table of Contents Index 401-406M
YP2425 and YP2425F Table of Contents Index Operating Instructions 38
Field Operation
First Pass Operation Checklist Page
1. Raise planter and line up at start of first
planting row
29
2. Set tractor 3-point hitch to “depth control”
operation (and not load control)
-
3. Unfold marker on next-row side. 40
4. Set fan hydraulic circuit to low flow,
engage circuit. Gradually adjust hydraulic
flow to 3800 rpm.
44
5. Engage drive via seed monitor. Refer to
seed monitor manual.
-
6. If planter has a fertilizer system integrated
with the DICKEY-john seed monitor, set
the “Fert.Pump” switch on the Clutch
Folding Module to ON.
49
7. In the CLUTCH cluster of the Clutch
Folding Module, set all switches, including
Master, to ON.
42
8. Pull forward, lower planter, and begin
planting for a short distance.
9. Stop. Assess:
•
planting depth
•
seed spacing
•
press wheel operation
•
fertilizer application (if in use)
10. Make necessary adjustments 52
Sharp Field Turns Checklist Page
1. Fold marker 40
2.
Raise planter 29
3. Make turn
4.
Lower planter 29
5. Unfold marker on next-row side. 40
6.
Resume planting.
Suspending Planting Checklist Page
1. Stop tractor
2.
Fan hydraulic circuit to Float or Neutral 44
3. Raise planter 29
4.
Fold Marker 40
Ending Planting Checklist Page
1. Suspend operations as above, then
2.
Install lift locks 33
3. Lights ON -
4.
Transport 34