manualshive.com logo in svg

GREAT PLAINS YP1630F-1630, Руководство оператора, Страница: 7 / 142

Поделиться
Скачать
GREAT PLAINS YP1630F-1630 Скачать руководство пользователя страница 7

YP1630F-1630 and YP1630F-1670

Table of Contents

Index

Important Safety Information

Great Plains

 | 401-832M | 2018-07-31

Table of Contents

Index

3

Handle Chemicals Properly

Read and follow chemical manufacturer’s instructions.

Wear protective clothing.

Handle all chemicals with care. 

Agricultural chemicals can be dangerous. Improper use
can seriously injure persons, animals, plants, soil and
property. 

Inhaling smoke from any type of chemical fire is a serious
health hazard.

Store or dispose of unused chemicals as specified by the
chemical manufacturer.

Immediately and thoroughly flush any area of the body
that is contaminated by chemicals.

If chemical is swallowed, carefully follow the chemical
manufacturer’s recommendations and consult with a
doctor.

If persons are exposed to a chemical in a way that could
affect their health, consult a doctor immediately with the
chemical label or container in hand. Any delay could
cause serious illness or death.

Dispose of empty chemical containers properly. By law
rinsing of the used chemical container must be repeated
three times. Puncture the container to prevent future use.
An alternative is to jet-rinse or pressure rinse the
container.

After working with chemicals, wash hands and face before
eating. Shower when application is completed for the day.

Never wash out the tanks within 30m (100 feet) of any
freshwater source or in a car wash.

Rinse out the tank. Apply rinse water on last field treated.

Keep Riders Off Machinery

Riders obstruct the operator’s view. Riders could be
struck by foreign objects or thrown from the machine.

Never allow children to operate equipment.

Keep all bystanders away from machine during operation.

Use Safety Lights and Devices

Slow-moving tractors and towed implements can create
a hazard when driven on public roads. They are difficult
to see, especially at night.

Use flashing warning lights and turn signals whenever
driving on public roads. 

Use lights and devices provided with implement.

Содержание YP1630F-1630















































































































































Отзывы:

Нет отзывов