06/12/2019
401-754M
YP625PD
Important Safety Information
6
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
Read and follow decal directions.
Keep lights in operating condition.
Keep all safety decals clean and legible.
Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
When ordering new parts or components, also request
corresponding safety decals.
Null4:
Slow Moving Vehicle Reflector
818-055C
On the tube supporting meter pressurization manifold;
1 total
Null4:
Red Reflectors
838-266C
All configurations:
on the rear face of the outside seed hoppers (rear row on
twin- or triple-row),
With Markers:
On the rear face of the inner arm, above daytime
reflectors;
2 or 4 total
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
Null4:
31026
Null4:
31822
