manualshive.com logo in svg

GREAT PLAINS Turbo-Max 6.0M, Руководство оператора

Поделиться
Скачать
GREAT PLAINS Turbo-Max 6.0M Скачать руководство пользователя страница 3

To our customer:

Congratulations on the purchase of your Great Plains product. Great Plains welcomes you to its 
growing family of new product owners. Your product has been designed and built by skilled 
workers using quality materials.

Your dealer has performed the necessary pre-delivery service to your machine, and will advise 
you of the proper maintenance and operating practices that will give you long, satisfactory use of 
your machine. Do not hesitate to contact your dealer when you have a question related to your 
machine.

Your machine has been designed to run efficiently in most operating conditions, and will perform 
relative to the service it receives. If you need customer service or repair parts, contact your dealer 
who has trained personnel, repair parts, and equipment specially designed for Great Plains 
products.

Read this manual carefully before using the machine. It will familiarize you with safety, operation, 
adjustments, and maintenance of your new equipment. This manual must always be kept with 
your machine.

Great Plains wants you to be satisfied with your product. If for any reason you do not understand 
any part of this manual or are otherwise dissatisfied, please take the following actions first: 

1.

Discuss the matter with your dealership service manager. Make sure he is aware of 
any problems so he can assist you.

2.

If you are still unsatisfied, seek out the owner or general manager of the dealership. 

If your dealer is unable to resolve the problem or the issue is parts related, please contact:

Great Plains Service Department

1525 E. North St.

P.O. Box 5060

Salina, KS, USA 67402-5060

Printed 01/31/2019 | English

Great Plains reserves the right to revise and improve its products at any time. This publication describes the state of this product at the

 

time of its publication, and may not reflect the product in the future. The content of this publication may be changed without notice.

Содержание Turbo-Max 6.0M















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды