GREAT PLAINS Turbo Max 1200TM, Руководство оператора, Страница: 25 / 40

1200-1500TM Table of Contents Index Operating Instructions 21
07/09/2018 Table of Contents Index 586-535M
Field Operation
This implement is designed to be pulled in the lowered
field position (including wide turns). Lifting for short
distances to clear residue clogs is acceptable. Lifting for
tight turns or reverse moves is required.
Equipment Damage Risk:
Lift for tight turns and reverse moves. Tight turns can result in
a section moving backward. Never back up with harrows on
the ground. If the inside tire stops or rolls backward, the turn is
tight and requires lift.
Field Set-Up Checklists
Use the following tables to develop a final checklist for
your tractor/Turbo Max configuration. Additional or fewer
steps may be necessary depending on tractor features,
Turbo Max options and accessories.
Final Checklist
Null4.aac:
Mechanical Checklist Page
q Turbo Max hitched 12
q Hitch pin locked -
q
Safety chain secured to tractor or leading
implement
12
q Parking jack stowed 12
q Check all tire pressures 28
q Transport locks are in the field position 16
Hydraulic System Checklist Page
q Check tractor hydraulic reservoir full -
q Make hydraulic connections 13
q Inspect connections for leaks -
Perform all steps in “ Pre-Start Checklist ” on page 19
and “ Final Checklist ” on page 21.
Do not make short radius turns with the implement in the
ground.
 If you stop in the middle of a pass, raise the
implement and back up 10’ before resumption of
tilling.
Electrical Checklist Page
q
Verify electrical hookups solid, or connector
securely stowed if not using lights in field.
13
First Pass Operation Checklist Page
1. Pull forward, lower Turbo Max, and begin tilling
for a short distance.
-
2.
Stop. Assess:
•
coulter depth
•
finishing attachment operation
-
3.
Make necessary adjustments
22
Sharp Field Turns Checklist Page
1.
Raise Turbo Max
-
2.
Make turn
-
3.
Lower Turbo Max
-
4.
Resume tilling.
-
Ending Tilling Checklist Page
1.
Suspend operations as above
-
2.
Lift implement
-
3.
Place locking valves in transport position
16
4.
Place transport locks in transport position
16
5.
Lower implement on to transport locks
-
6.
Lights ON for transport
-