manualshive.com logo in svg

GREAT PLAINS Turbo Max 1200TM, Руководство оператора, Страница: 7 / 40

Поделиться
Скачать
GREAT PLAINS Turbo Max 1200TM Скачать руководство пользователя страница 7

1200-1500TM

Table of Contents

Index

Important Safety Information

3

07/09/2018

Table of Contents

Index

586-535M

Transport Machinery Safely

Maximum transport speed for implement is 20 mph (32

kph), 13 mph (22 kph) in turns. Some rough terrains

require a slower speed. Sudden braking can cause a

towed load to swerve and upset. 

Do not tow an implement or nurse tank that weighs more

than 1.5 times the weight of towing vehicle.

Carry reflectors or flags to mark Turbo Max in case of

breakdown on the road.

Keep clear of overhead power lines and other
obstructions when transporting. Refer to transport

dimensions under “

Turbo Max Specifications and

Capacities

” on page 28.

Do not exceed 20 mph. Never travel at a speed which does
not allow adequate control of steering and stopping.

Reduce speed if towed load is not equipped with brakes.

Reduce speed on rough roads.

Comply with national, regional and local laws.

Do not fold or unfold the Turbo Max while the tractor is

moving.

Shutdown and Storage

Lower Turbo Max, put tractor in park, turn off engine,

and remove the key.

Secure Turbo Max using parking jack provided.

Detach and store Turbo Max in an area where children
normally do not play.

Tire Safety

Tire changing can be dangerous. Employ trained

personnel using correct tools and equipment.

When inflating tires, use a clip-on chuck and extension

hose long enough for you to stand to one side–not in front

of or over tire assembly. Use a safety cage if available.

When removing and installing wheels, use wheel-handling
equipment adequate for weight involved.

Содержание Turbo Max 1200TM









































Отзывы:

Нет отзывов